Post by gregwest on Feb 29, 2012 0:23:51 GMT -5
<b>Herpstat Intro</b>
Features:
•True proportional heating (Dimming Sytle).
•Constantly monitors and adjusts amount of heat necessary to maintain a target temperature (Usable range from 40°F to 150°F or 4°C to 65°C). Can also be used in non-proportional (on / off) mode.
•Soft startup slowly applies power during initial warmups.
•User selectable temperature ramping allows day to night changes to occur slowly. (Up to 10 hours)
•Sensor Matching allows the user to digitally calibrate the sensor output to match other equipment.
•Software clock provides night drop feature.
•High / Low temperature tracking helps monitor heating system and enclosure efficiency.
•Selectable High / Low temperature threshold alarms.
•Precision sensor with internal resolution of .1125 °F and is accurate to ± .9 °F
•Display and setting in tenths of a degree.
•All settings are retained in memory even if power is lost.
•Power Outage detection / tracking.
•Temperature can be set / displayed in Fahrenheit or Celsius.
•Easy to read backlit LCD display.
•Removable 12' temperature probe allow for easy replacement if necessary.
•Resettable fuse never requires replacement.
•Audible alarm system
•Internal error detection shuts off heat if sensor fails or is disconnected.
•350 Watts Output Power
•1 year limited warranty
•Herpstat Intro - $135.00
<b>Herpstat 1 Basic</b>
On a budget? Don't go without a quality controller! The all new for 2012 Herpstat 1 Basic! The Herpstat 1 Basic takes the core features of the Herpstat 1 but leaves out the hardware internal clock, safety relay feature, and humdiity functions to bring the cost down. The device adds a software clock that still provides plenty of configurable night time transition settings. These advanced controllers can be used for precision tempearture control or lighting control. Housed in desktop style cases they can easily sit on top of your rack, cage, or incubator. Dual proportional temperature controlling modes (Dimming or Pulse) are built in so you can choose the mode that works best with your setup. A built in soft startup feature will slowly add power on initial starts as well as a user selectable ramping between day and night time temperature settings. A new revolutionary auto power matching algorithm constantly adjusts the power output to get the best regulation possible. We also added new AC control code that lets the device adjust power in 100 steps to be able to finely tune the heating equipment. High and low temperature tracking and audible alerts are standard. We added a timeout function that can cut power if the user's low temperature is not reached within 30 minutes. Three prong grounded outlets are standard assuring compatibility with most heating devices.
Features:
•Proportional heating constantly monitors and adjusts amount of heat necessary to maintain a target temperature (usable range from 40°F to 150°F or 4°C to 65°C).
•Soft startup slowly applies power during initial warm-ups.
•User selectable temperature and light ramping allows day to night changes to occur slowly. (Up to 10 hours)
•Sensor Matching allows the user to digitally calibrate the sensor output to match other equipment.
•Configurable for Heating, Cooling, and Lighting.
•Auto Power Matching constantly adjusts the power output curve to match the enclosures efficiency.
•High / Low temperature tracking helps monitor heating system and enclosure efficiency.
•Precision sensor with internal resolution of .1125 °F and is accurate to ± .9 °F
•Display and setting in tenths of a degree.
•All settings are retained in memory even if power is lost. *
•Power Outage detection / tracking.
•Temperature can be set / displayed in Fahrenheit or Celsius.
•Easy to read backlit LCD display.
•Removable 12' temperature probe allow for easy replacement if necessary.
•User replaceable fuse.
•Audible alarm system
•Individually selectable High/Low temperature threshold alarms.
•Security Passcode option deters vandals.
•Internal error detection shuts off heat if sensor fails or is disconnected.
•700 total watt output for the Herpstat 1
•1 year limited warranty
•Herpstat I Basic - $155.00
* Software clock is reset and features requiring the clock are disabled on power loss.
<b>Herpstat 1 and Herpstat 2</b>
Features:
•Proportional heating constantly monitors and adjusts amount of heat necessary to maintain a target temperature (usable range from 40°F to 150°F or 4°C to 65°C).
•Soft startup slowly applies power during initial warm-ups.
•User selectable temperature and light ramping allows day to night changes to occur slowly. (Up to 10 hours)
•Sensor Matching allows the user to digitally calibrate the sensor output to match other equipment.
•Configurable for Heating, Cooling, Lighting, and Humidity.
•Auto Power Matching constantly adjusts the power output curve to match the enclosures efficiency.
•High / Low temperature tracking helps monitor heating system and enclosure efficiency.
•Precision sensor with internal resolution of .1125 °F and is accurate to ± .9 °F
•Display and setting in tenths of a degree.
•All settings are retained in memory even if power is lost.
•Power Outage detection / tracking.
•Temperature can be set / displayed in Fahrenheit or Celsius.
•Easy to read backlit LCD display.
•Removable 12' temperature probe allow for easy replacement if necessary.
•User replaceable fuse.
•Audible alarm system
•Individually selectable High/Low temperature threshold alarms.
•Security Passcode option deters vandals.
•Internal error detection shuts off heat if sensor fails or is disconnected.
•700 total watt output for the Herpstat 1
•900 total watt output for the Herpstat 2 (500W max per output)
•1 year limited warranty
•Herpstat 1 - $175.00
•Herpstat 2 - $255.00
<b>Herpstat 4</b>
Features:
•Four grounded outlets capable of true proportional heating.
•Constantly monitors and adjusts amount of heat necessary to maintain a target temperature (Usable range from 40°F to 150°F or 4°C to 65°C). Can also be used in non-proportional (on / off) mode.
•Outputs 1 & 2 configurable for Heating/Cooling/Lighting. Outputs 3 & 4 can be configured for Heating/Cooling/Humidity/Lighting with simulated sunrise/sunset and moonlight features.
•Humidity control with timed sessions or regulated with an optional sensor.
•Safety Relay can disconect power to all four outlets if the an error exists.
•Soft startup slowly applies power during initial warmups.
•User selectable temperature and light ramping allows day to night changes to occur slowly. (Up to 10 hours)
•Sensor Matching allows the user to digitally calibrate the sensor output to match other equipment.
•Night Drop feature built in with real time clock allows individual night drop settings for each output.
•Cooling function allows control of basic cooling devices.
•High / Low temperature tracking helps monitor heating system and enclosure efficiency.
•Individually selectable High / Low temperature threshold alarms.
•Precision sensors with internal resolution of .1125 °F and is accurate to ± .9 °F
•Display and setting in tenths of a degree.
•All settings are retained in memory even if power is lost.
•Power Outage detection / tracking.
•Temperature can be set / displayed in Fahrenheit or Celsius.
•Easy to read backlit LCD display.
•Removable sensors allow for easy replacement if necessary.
•Resettable fuses never require replacement.
•Each output is fused separately keeping an outage on one output from affecting the other.
•Audible alarm system
•Internal error detection shuts off heat if sensor fails or is disconnected.
•Internal temperature sensor monitors heat and controls internal fan. Also shuts down outputs if overheated for safety. Restarts automatically once cooled.
•Security Passcode option deters vandals.
•400 Watt rating for each output (1600 watts total output) sufficient for most incubators, rack systems, enclosures, and vivariums.
•1 year limited warranty
•$435.00
Features:
•True proportional heating (Dimming Sytle).
•Constantly monitors and adjusts amount of heat necessary to maintain a target temperature (Usable range from 40°F to 150°F or 4°C to 65°C). Can also be used in non-proportional (on / off) mode.
•Soft startup slowly applies power during initial warmups.
•User selectable temperature ramping allows day to night changes to occur slowly. (Up to 10 hours)
•Sensor Matching allows the user to digitally calibrate the sensor output to match other equipment.
•Software clock provides night drop feature.
•High / Low temperature tracking helps monitor heating system and enclosure efficiency.
•Selectable High / Low temperature threshold alarms.
•Precision sensor with internal resolution of .1125 °F and is accurate to ± .9 °F
•Display and setting in tenths of a degree.
•All settings are retained in memory even if power is lost.
•Power Outage detection / tracking.
•Temperature can be set / displayed in Fahrenheit or Celsius.
•Easy to read backlit LCD display.
•Removable 12' temperature probe allow for easy replacement if necessary.
•Resettable fuse never requires replacement.
•Audible alarm system
•Internal error detection shuts off heat if sensor fails or is disconnected.
•350 Watts Output Power
•1 year limited warranty
•Herpstat Intro - $135.00
<b>Herpstat 1 Basic</b>
On a budget? Don't go without a quality controller! The all new for 2012 Herpstat 1 Basic! The Herpstat 1 Basic takes the core features of the Herpstat 1 but leaves out the hardware internal clock, safety relay feature, and humdiity functions to bring the cost down. The device adds a software clock that still provides plenty of configurable night time transition settings. These advanced controllers can be used for precision tempearture control or lighting control. Housed in desktop style cases they can easily sit on top of your rack, cage, or incubator. Dual proportional temperature controlling modes (Dimming or Pulse) are built in so you can choose the mode that works best with your setup. A built in soft startup feature will slowly add power on initial starts as well as a user selectable ramping between day and night time temperature settings. A new revolutionary auto power matching algorithm constantly adjusts the power output to get the best regulation possible. We also added new AC control code that lets the device adjust power in 100 steps to be able to finely tune the heating equipment. High and low temperature tracking and audible alerts are standard. We added a timeout function that can cut power if the user's low temperature is not reached within 30 minutes. Three prong grounded outlets are standard assuring compatibility with most heating devices.
Features:
•Proportional heating constantly monitors and adjusts amount of heat necessary to maintain a target temperature (usable range from 40°F to 150°F or 4°C to 65°C).
•Soft startup slowly applies power during initial warm-ups.
•User selectable temperature and light ramping allows day to night changes to occur slowly. (Up to 10 hours)
•Sensor Matching allows the user to digitally calibrate the sensor output to match other equipment.
•Configurable for Heating, Cooling, and Lighting.
•Auto Power Matching constantly adjusts the power output curve to match the enclosures efficiency.
•High / Low temperature tracking helps monitor heating system and enclosure efficiency.
•Precision sensor with internal resolution of .1125 °F and is accurate to ± .9 °F
•Display and setting in tenths of a degree.
•All settings are retained in memory even if power is lost. *
•Power Outage detection / tracking.
•Temperature can be set / displayed in Fahrenheit or Celsius.
•Easy to read backlit LCD display.
•Removable 12' temperature probe allow for easy replacement if necessary.
•User replaceable fuse.
•Audible alarm system
•Individually selectable High/Low temperature threshold alarms.
•Security Passcode option deters vandals.
•Internal error detection shuts off heat if sensor fails or is disconnected.
•700 total watt output for the Herpstat 1
•1 year limited warranty
•Herpstat I Basic - $155.00
* Software clock is reset and features requiring the clock are disabled on power loss.
<b>Herpstat 1 and Herpstat 2</b>
Features:
•Proportional heating constantly monitors and adjusts amount of heat necessary to maintain a target temperature (usable range from 40°F to 150°F or 4°C to 65°C).
•Soft startup slowly applies power during initial warm-ups.
•User selectable temperature and light ramping allows day to night changes to occur slowly. (Up to 10 hours)
•Sensor Matching allows the user to digitally calibrate the sensor output to match other equipment.
•Configurable for Heating, Cooling, Lighting, and Humidity.
•Auto Power Matching constantly adjusts the power output curve to match the enclosures efficiency.
•High / Low temperature tracking helps monitor heating system and enclosure efficiency.
•Precision sensor with internal resolution of .1125 °F and is accurate to ± .9 °F
•Display and setting in tenths of a degree.
•All settings are retained in memory even if power is lost.
•Power Outage detection / tracking.
•Temperature can be set / displayed in Fahrenheit or Celsius.
•Easy to read backlit LCD display.
•Removable 12' temperature probe allow for easy replacement if necessary.
•User replaceable fuse.
•Audible alarm system
•Individually selectable High/Low temperature threshold alarms.
•Security Passcode option deters vandals.
•Internal error detection shuts off heat if sensor fails or is disconnected.
•700 total watt output for the Herpstat 1
•900 total watt output for the Herpstat 2 (500W max per output)
•1 year limited warranty
•Herpstat 1 - $175.00
•Herpstat 2 - $255.00
<b>Herpstat 4</b>
Features:
•Four grounded outlets capable of true proportional heating.
•Constantly monitors and adjusts amount of heat necessary to maintain a target temperature (Usable range from 40°F to 150°F or 4°C to 65°C). Can also be used in non-proportional (on / off) mode.
•Outputs 1 & 2 configurable for Heating/Cooling/Lighting. Outputs 3 & 4 can be configured for Heating/Cooling/Humidity/Lighting with simulated sunrise/sunset and moonlight features.
•Humidity control with timed sessions or regulated with an optional sensor.
•Safety Relay can disconect power to all four outlets if the an error exists.
•Soft startup slowly applies power during initial warmups.
•User selectable temperature and light ramping allows day to night changes to occur slowly. (Up to 10 hours)
•Sensor Matching allows the user to digitally calibrate the sensor output to match other equipment.
•Night Drop feature built in with real time clock allows individual night drop settings for each output.
•Cooling function allows control of basic cooling devices.
•High / Low temperature tracking helps monitor heating system and enclosure efficiency.
•Individually selectable High / Low temperature threshold alarms.
•Precision sensors with internal resolution of .1125 °F and is accurate to ± .9 °F
•Display and setting in tenths of a degree.
•All settings are retained in memory even if power is lost.
•Power Outage detection / tracking.
•Temperature can be set / displayed in Fahrenheit or Celsius.
•Easy to read backlit LCD display.
•Removable sensors allow for easy replacement if necessary.
•Resettable fuses never require replacement.
•Each output is fused separately keeping an outage on one output from affecting the other.
•Audible alarm system
•Internal error detection shuts off heat if sensor fails or is disconnected.
•Internal temperature sensor monitors heat and controls internal fan. Also shuts down outputs if overheated for safety. Restarts automatically once cooled.
•Security Passcode option deters vandals.
•400 Watt rating for each output (1600 watts total output) sufficient for most incubators, rack systems, enclosures, and vivariums.
•1 year limited warranty
•$435.00
