Post by gregwest on Jan 17, 2011 18:09:48 GMT -5
PVC Racks for Sale - Custom Sizes are available - Knock down racks possibly available
depending on interest.
I have now introduced PVC caging and racking into my lineup of caging and racking. These
designs are based on a US design and have years of use in the US market. These racks are light
and they are designed to last. While I will still custom build melamine racks I feel that the
plastic is a much better, more permanent way to go. They are lighter, more moisture resistant,
and fire retardant. Racks are stackable and come with alignment pins and slide stop pins if you
would like. No one else offers this in Canada.
All racks are based on IRIS bins, but custom sizes could be available if you would like. Pricing
listed below include all heating and bins and are ready to be plugged in. All racks have an access
in the back to also allow for probe installation. I plan on keeping stock of each of these sizes
ready for pickup or shipping. Racks are mainly available in black but white is available at the
same price.
These racks are also made of 3/8" thick PVC not 1/4" so they are a bit heavier, but stronger than
the 1/4" models available.
Another note as well. The back heat models can be revised to have belly heat instead if required
depending on the model. For the smaller tubs it would not be recommended to run belly heat as
it runs a greater risk of overheating snakes because of the size of the tub and the size of the heat
source. The back heat design is also not pinched between shelves allowing for no hot spots and
easy change if required.. Belly heat models have the heat tape recessed into the floor to prevent
rubbing and premature wear on the heat tape. Models also allow air flow over the belly heat tape
to prevent overheating and easy customer changing of the heat tape if replacement is required.
I have some designs that I can also put into production that would be shipped with or without
tubs that would be a knock down design to save on shipping, but I would like to see if there is
much interest in building it yourself.
Cage designs will be listed for sale in the coming weeks. Please e-mail me if you would like to
inquire or if you have any questions. Wholesale pricing will be available as well.
MCB-SS Back heat 16 Bin Rack - 16 Tub Rack Dimensions 36 1/2" x 17" wide x 14" deep
Tub Dimensions - 8" x 13 1/8" x 4" (approx)/ 5.4 quarts - $349.99
MCB-S Wide Version 8 tub rack– Belly Heat Rack Dimensions - 16 3/4" deep x 22 1/4" wide x
25 1/2" tall. Tub Dimensions - 10 1/2" x 15 3/4" x 5 1/2" (approx)/ 12.2 quarts - $349.99
MCB-L 4 Tub Back heat Rack Dimensions - 17" x 24" x 26.75" Tub Dimensions - 16 1/8" x23
3/4" x 6" (approx)/ 30.6 quarts - $354.99
CB70 4 Tub Rack up to 2 rows of 4" undertub heating 23 13/16” X 18 ½” X 34”, tub dimensions
- 17.75" x 33.5" x 5.25" - Starting at $399.99
NEW MODEL
Canada’s First Arboreal Rack for Lizards and Snakes.
Rack Dimensions - 38" Tall x 17" wide x 14" deep Tub Dimensions - 13.5" x 15.75" x 12"
(approx) - $349.99
Many other sizes and configurations are also listed on my website
(http://www.cornelsworld.com) under the terrariums tab on the left and then under the PVC
racks section at the top.
Models that are ready to go right now are
MCB-SS 16 tubs, White and Black $349.99
MCB-S 8 tubs Black $349.99
MCB-L Back Heat Black 4 tubs - $354.99
MCB-L Belly Heat Black - 4 tubs - $364.99
MCB-L Back Heat White 6 tubs - Some damage - $450.00 - includes 6 bin dividers
CB-70 Belly Heat - 2 Rows 4" 4 tubs Black - $425.99
CB-70 - 2 Rows 4" - 4 tubs White - $399.99
MCB-MD - Arboreal Rack - Back heat - Black - $309.99
More pictures are available on my website
If you are looking at building your own racks you may want to consider changing over your bins.
IRIS bins are the flat alternative to the Rubbermaid or Sterilite. Flat bottoms make cleaning
much easier. Wholesale pricing available as well. Most of the bins have more floor space vs
sterilite and rubbermaid as well.
IRIS TUB Sizes and Codes that are available. Prices is each and is bought in case quantities
MCB-SS - 18/CASE $3.60 each
MCB-S - 16/CASE $4.80 each
MCB-L - 12/CASE $9.45 each
CB-70 - 12/CASE $14.99 each
MCB-MD 10/CASE $9.00 each
Payment Plans are available.
Shipping can be done through email Canada Post, Greyhound, UPS, or Canadian Freightways.
Thanks
Greg West
Cornel's World Terrariums
www.cornelsworld.com
Quality Customized Terrariums
PVC Cages for Sale
These cages are among the best in their class. We use only top quality parts and materials
STANDARD. We do not consider top quality hinges and latches to be optional!! All cages,
come with either black hinges and thumb turns or black sliding glass tracks with chrome display
locks. These cages are also made with 10mm thick PVC, not 6mm pvc which tends to sag when
stacked. These cages are designed to be lightweight and sturdy unlike some other cages on the
market.
Hinges
Latch
All cages are made from strong, durable, fire resistant/self extinguishing expanded foam PVC
sheet.
Please note:
Most rack/cage orders currently take a MINIMUM of 10 business days before they ship.
PVCX Caging
Measurements Apx Size (US Gallons) Price CAN $
2'L X2'W X1'H 30 Gallons $160.00
2'L X2'W X16"H 40 Gallons $185.00
2'L X2'W X2'H 60 Gallons $210.00
3'L X2'W X1'H 45 Gallons $235.00
3'L X2'W X16"H 60 Gallons $295.00
3'L X2'W X2'H 90 Gallons $310.00
4'L X2'W X1'H 60 Gallons $265.00
4'L X2'W X16"H 80 Gallons $310.00
4'L X2'W X2'H 120 Gallons $355.00
Options
1' tall Permanent divider $20.00
16" tall Permanent divider $25.00
2' tall Permanent divider $30.00
Sliding Glass doors with lock $10.00-$20.00
2' Pedestal $70.00
3' Pedestal $90.00
4' Pedestal $110.00
4' Cage Double doors $20.00 - $40.00
4' Cage Triple doors $30.00 - $60.00
Side Splice for joining 2 cages together - 2 cage prices plus this cost to make 1 large cage.
$80.00 - $100.00
All PVC Cages include:
• 10mm Thick 1 piece shell with 6mm side walls
• Side walls dadoed and inset for added strength
• Fixed vent holes
• Black display quality hardware standard (Not galvanized)
• Interior sealed to prevent leaks
• Lighting can be installed for an additional charge
• Quality craftsmanship
• 1/4" thick hinged plexiglass doors
• Predrilled alignment pin holes for stacking cages
Custom designed builds, and quantity orders can be done. Please send me an email describing
what you are looking for and I will do my best to accommodate your requests.
depending on interest.
I have now introduced PVC caging and racking into my lineup of caging and racking. These
designs are based on a US design and have years of use in the US market. These racks are light
and they are designed to last. While I will still custom build melamine racks I feel that the
plastic is a much better, more permanent way to go. They are lighter, more moisture resistant,
and fire retardant. Racks are stackable and come with alignment pins and slide stop pins if you
would like. No one else offers this in Canada.
All racks are based on IRIS bins, but custom sizes could be available if you would like. Pricing
listed below include all heating and bins and are ready to be plugged in. All racks have an access
in the back to also allow for probe installation. I plan on keeping stock of each of these sizes
ready for pickup or shipping. Racks are mainly available in black but white is available at the
same price.
These racks are also made of 3/8" thick PVC not 1/4" so they are a bit heavier, but stronger than
the 1/4" models available.
Another note as well. The back heat models can be revised to have belly heat instead if required
depending on the model. For the smaller tubs it would not be recommended to run belly heat as
it runs a greater risk of overheating snakes because of the size of the tub and the size of the heat
source. The back heat design is also not pinched between shelves allowing for no hot spots and
easy change if required.. Belly heat models have the heat tape recessed into the floor to prevent
rubbing and premature wear on the heat tape. Models also allow air flow over the belly heat tape
to prevent overheating and easy customer changing of the heat tape if replacement is required.
I have some designs that I can also put into production that would be shipped with or without
tubs that would be a knock down design to save on shipping, but I would like to see if there is
much interest in building it yourself.
Cage designs will be listed for sale in the coming weeks. Please e-mail me if you would like to
inquire or if you have any questions. Wholesale pricing will be available as well.
MCB-SS Back heat 16 Bin Rack - 16 Tub Rack Dimensions 36 1/2" x 17" wide x 14" deep
Tub Dimensions - 8" x 13 1/8" x 4" (approx)/ 5.4 quarts - $349.99
MCB-S Wide Version 8 tub rack– Belly Heat Rack Dimensions - 16 3/4" deep x 22 1/4" wide x
25 1/2" tall. Tub Dimensions - 10 1/2" x 15 3/4" x 5 1/2" (approx)/ 12.2 quarts - $349.99
MCB-L 4 Tub Back heat Rack Dimensions - 17" x 24" x 26.75" Tub Dimensions - 16 1/8" x23
3/4" x 6" (approx)/ 30.6 quarts - $354.99
CB70 4 Tub Rack up to 2 rows of 4" undertub heating 23 13/16” X 18 ½” X 34”, tub dimensions
- 17.75" x 33.5" x 5.25" - Starting at $399.99
NEW MODEL
Canada’s First Arboreal Rack for Lizards and Snakes.
Rack Dimensions - 38" Tall x 17" wide x 14" deep Tub Dimensions - 13.5" x 15.75" x 12"
(approx) - $349.99
Many other sizes and configurations are also listed on my website
(http://www.cornelsworld.com) under the terrariums tab on the left and then under the PVC
racks section at the top.
Models that are ready to go right now are
MCB-SS 16 tubs, White and Black $349.99
MCB-S 8 tubs Black $349.99
MCB-L Back Heat Black 4 tubs - $354.99
MCB-L Belly Heat Black - 4 tubs - $364.99
MCB-L Back Heat White 6 tubs - Some damage - $450.00 - includes 6 bin dividers
CB-70 Belly Heat - 2 Rows 4" 4 tubs Black - $425.99
CB-70 - 2 Rows 4" - 4 tubs White - $399.99
MCB-MD - Arboreal Rack - Back heat - Black - $309.99
More pictures are available on my website
If you are looking at building your own racks you may want to consider changing over your bins.
IRIS bins are the flat alternative to the Rubbermaid or Sterilite. Flat bottoms make cleaning
much easier. Wholesale pricing available as well. Most of the bins have more floor space vs
sterilite and rubbermaid as well.
IRIS TUB Sizes and Codes that are available. Prices is each and is bought in case quantities
MCB-SS - 18/CASE $3.60 each
MCB-S - 16/CASE $4.80 each
MCB-L - 12/CASE $9.45 each
CB-70 - 12/CASE $14.99 each
MCB-MD 10/CASE $9.00 each
Payment Plans are available.
Shipping can be done through email Canada Post, Greyhound, UPS, or Canadian Freightways.
Thanks
Greg West
Cornel's World Terrariums
www.cornelsworld.com
Quality Customized Terrariums
PVC Cages for Sale
These cages are among the best in their class. We use only top quality parts and materials
STANDARD. We do not consider top quality hinges and latches to be optional!! All cages,
come with either black hinges and thumb turns or black sliding glass tracks with chrome display
locks. These cages are also made with 10mm thick PVC, not 6mm pvc which tends to sag when
stacked. These cages are designed to be lightweight and sturdy unlike some other cages on the
market.
Hinges
Latch
All cages are made from strong, durable, fire resistant/self extinguishing expanded foam PVC
sheet.
Please note:
Most rack/cage orders currently take a MINIMUM of 10 business days before they ship.
PVCX Caging
Measurements Apx Size (US Gallons) Price CAN $
2'L X2'W X1'H 30 Gallons $160.00
2'L X2'W X16"H 40 Gallons $185.00
2'L X2'W X2'H 60 Gallons $210.00
3'L X2'W X1'H 45 Gallons $235.00
3'L X2'W X16"H 60 Gallons $295.00
3'L X2'W X2'H 90 Gallons $310.00
4'L X2'W X1'H 60 Gallons $265.00
4'L X2'W X16"H 80 Gallons $310.00
4'L X2'W X2'H 120 Gallons $355.00
Options
1' tall Permanent divider $20.00
16" tall Permanent divider $25.00
2' tall Permanent divider $30.00
Sliding Glass doors with lock $10.00-$20.00
2' Pedestal $70.00
3' Pedestal $90.00
4' Pedestal $110.00
4' Cage Double doors $20.00 - $40.00
4' Cage Triple doors $30.00 - $60.00
Side Splice for joining 2 cages together - 2 cage prices plus this cost to make 1 large cage.
$80.00 - $100.00
All PVC Cages include:
• 10mm Thick 1 piece shell with 6mm side walls
• Side walls dadoed and inset for added strength
• Fixed vent holes
• Black display quality hardware standard (Not galvanized)
• Interior sealed to prevent leaks
• Lighting can be installed for an additional charge
• Quality craftsmanship
• 1/4" thick hinged plexiglass doors
• Predrilled alignment pin holes for stacking cages
Custom designed builds, and quantity orders can be done. Please send me an email describing
what you are looking for and I will do my best to accommodate your requests.